INFOSEC UPS SYSTEM E4LCD1000 Mode D'emploi page 32

Step 5: Disable and enable EPO function
Keep pin 1 and pin 2 closed for UPS normal operation. Cut the wire between pin 1 and pin 2 to
activate EPO function.
Step 6: Turn on the UPS
Press the ON/Mute button on the front panel for two seconds to power up the UPS.
Note: The battery charges fully during the first five hours of normal operation. Do not
expect full battery run capability during this initial charge period.
Step 7: Install software
For optimal computer system protection, install UPS monitoring software to fully configure
UPS shutdown. Please follow the steps below install monitoring software:
1. Insert provided CD-ROM
2. Follow the on-screen instructions to install the software.
3. When your computer restarts, the monitoring software will appear as an orange plug icon
located in the system tray, near the clock.
Step 8: External battery connection
For long-run models only (S versions)
Before making external battery connection, please follow chart below to connect external
battery.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
31
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 10 AA 59 203 04
All manuals and user guides at all-guides.com
It is in closed status for UPS normal operation.