Using The Component Video And Audio Input Jacks; Connecting A Dvd Player - Sanyo DS20424 Manuel D'instructions

Using the Component Video and Audio Input Jacks

QuickTips
A solid Blue screen
I
with COMPONENT2
displayed means
that the Video mode
is selected, but no
signal is being
detected at the
Component jacks.
Check connection,
and turn on external
equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
What you will need for connections:
‚
ƒ
Remote Control
POWER
INPUT RESET
MENU RECALL
…
CH
Press INPUT key after
connecting cables to access
the A/V inputs.
There is NO need to tune
to a blank channel.
6
Connect a DVD Player to Component AV In

CONNECTING A DVD PLAYER

Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
‚
Connect a DVD Player or other equipment's interlaced Component Video Out to the TV
Component Video In (Y-Pb-Pr) Jacks.
ƒ
Connect the DVD Player's Audio Out to the TV A/V2 Audio In (L/R) Jacks.
„
Press POWER to turn on the TV. Turn on external equipment also.
…
To access Audio/Video inputs, press the INPUT key to select COMPONENT2.
Notes: DVD Player component output must be set to Interlaced (480i).
Audio/Video Input (AV2) and Component inputs share the same audio (R/L) input
jacks.
Connect equipment to the component video inputs or the AV2 video input, but not
both types at the same time.
Component video cable – 1
Audio Cable – 1
‚
„
TV BACK
UHF/VHF/CATV
AUDIO VIDEO
COMPONENT
75Ω
2
INPUT 2
VIDEO
Y
P L
B
P
R
R
S-VIDEO
DVD Player
VIDEO OUT
AUDIO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
L R COAXIAL
DIGITAL OUT S-VIDEO OUT
ƒ
ƒ
COMPONENT VIDEO OUT
Y P /C P /C
B B R R
‚