Using The Component Video And Audio Input Jacks - Sanyo DS24424 Manuel D'instructions

Using the Component Video and Audio Input Jacks

Connecting a DVD Player or other equipment
QuickTips
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
You may be able
■
to use the TV
remote control
to operate your
DVD Player. (See
pages 9 ~11).
A solid Blue screen
■
with COMPONENT2
displayed means
that the Compo-
nent Video mode
is selected, but
no signal is being
detected at the Com-
ponent jacks. Check
connection, and
turn on external
equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Press INPUT key after
connecting cables to access the A/V
inputs.
here is NO need to tune to a blank
T
channel.
Using the Front Video and Audio Input Jacks
Connecting a Video Game or other equipment
Switch off TV and external equipment before connecting cables.
(Cables are not supplied.)
Connect game Audio Output (R/L) to the TV Audio Input (R/L).
Then connect game Video Output to the TV Video Input.
Press POWER to turn on the TV. Turn on external equipment
also.
To access Audio/Video inputs, press the INPUT key to select
GAME or select using the menu.
6
Component / Front A/V Input Jacks
Connect a DVD Player or other digital equipment's interlaced Component Video Output to
the TV Component Video Input (Y-Pb-Pr) Jacks.
Connect the DVD Player's Audio Output to the TV A/V2 Audio Input (L/R) Jacks.
Press POWER to turn on the TV. Turn on external equipment also.
To access Audio/Video inputs, press the INPUT key to select COMPONENT2.
Notes: DVD Player component output must be set to Interlaced (480i).
Audio/Video Input (AV2) and Component inputs share the same audio (R/L)
input jacks.
Connect equipment to the component inputs or A/V2 inputs, but not both sets at
the same time.
What you will need for connections:
Component video cable – 1
Remote Control
Audio Cable – 1
VCR TV AUX
POWER
INPUT RESET
AUDIO OUT
L
TV Back
UHF/VHF/CATV
AUDIO VIDEO
COMPONENT
75Ω
2 INPUT 2
VIDEO
Y
P L
B
P
R
R
S-VIDEO
What you will need for connections:
❶
Audio / Video cable – 1
VIDEO IN L- AUDIO -R
VIDEO IN L- AUDIO -R
Camecorder
DVD Player
VIDEO OUT
COMPONENT VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
R COAXIAL Y P /C P /C
B B R R
DIGITAL OUT S-VIDEO OUT
MENU CH VOL POWER
Video Game