Sauder Library 158082 Instructions De Montage page 9

Step 4
Fasten the RIGHT END (A) to the TOP (C2). Tighten two
å
TWIST-LOCK® FASTENERS.
Fasten the SHELF (D) and BOTTOM (E) to RIGHT END (A).
å
Tighten four TWIST-LOCK® FASTENERS.
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Long fi nished edge
C2
www.sauder.com/services
Finished edge
These holes
must be here.
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
A
D
158082
®
FASTENER
E
These holes
must be here.
Dowel end
Page 9