Sauder Library 158082 Instructions De Montage page 19

Step 14
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D83 and D84).
å
Fasten a DRAWER RIGHT (35GC) to the RIGHT DRAWER SIDE (D83)
å
and a DRAWER LEFT (35GD) to the LEFT DRAWER SIDE (D84). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the
å
slotted hole in the SLIDE.
Fasten two KNOBS (87K) to the DRAWER FRONT (K2). Use two
å
BLACK 1-1/4" FLAT HEAD SCREWS (7S).
2
3
www.sauder.com/services
Roller end
1
D84
K2
87K
10A
BLACK 1-1/4" FLAT HEAD SCREW
(2 used for the KNOBS)
D83
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
158082
If you're doing this to
help a friend, don't
leave without a bite.
7S
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
1
2
3
3S
Roller end
Page 19