Black 1-1/4" Flat Head Screw; Black 1/2" Flat Head Screw - Sauder Library 158082 Instructions De Montage

Step 11
Carefully stand your unit upright.
å
Before fastening the DOOR to your unit, be sure the
å
mounting screw is against the stops as shown in the lower
right diagram. If it isn't, loosen the mounting screw to slide
it against the stops. Then tighten the mounting screw.
Fasten the RIGHT DOOR (I) to the RIGHT END (A). Use the
å
screws in the HINGES.
Fasten a KNOB (87K) to the RIGHT DOOR (I). Use a
å
BLACK 1-1/4" FLAT HEAD SCREW (7S).
Repeat this step for the LEFT DOOR (J).
å
See the next step for DOOR adjustments.
å
Page 16
A
I
158082
Stop
Mounting
screw
87K
7S

BLACK 1-1/4" FLAT HEAD SCREW

(2 used for the KNOBS)
Hinge
www.sauder.com/services