Charge The Device; Notes For Charging; Configuration Of New Device; Connect To Wi-Fi Network - AGPtek T03S Mode D'emploi

Charge The Device

When the battery level is too low, the system will pop up a low power prompt. Please charge
the device in time, otherwise the device will automatically shut down.
Charge the device through a charger:

Please use a special charger to charge the device, and the specification of charger is 5V/1A.
Charge the device via USB interface:

The device can be charged by connecting it to a computer via USB cable without a charger.
1. Connect the player to a computer or other devices via USB cable. And the player's
pull-down notification bar will display "Transferring files via USB".
2. Tap it to select "Charge Only".

Notes For Charging

1. The battery can be recharged repeatedly, but the battery is a lossy product. If the standby
time is found to be greatly reduced, the battery needs to be replaced.
2. For non-removable battery, please do not replace it by yourself. Please contact our
customer service for consultation.
3. After the device is operated for a long time, especially in a high temperature environment,
it is a normal phenomenon that the surface might be hot. When you feel it is hot, please
stop charging, turn off some functions as well as moving the device to a cool place. Avoid
prolonged contact with hot surface.
4. Battery charging time will vary with temperature conditions and battery usage.
5. It is recommended not to operate the device while charging, and do not cover the device
and charger.
[Note]:
(1) New battery needs several charging and discharging processes to achieve the best
performance.
(2) If you do not use the device for a long time, please charge and discharge it at least once a
month to prevent damage caused by excessive battery consumption.
(3) Polymer battery damage caused by excessive consumption is not covered by the warranty.
If the device is charged with a charger that is not dedicated to this unit, the problem
caused by that is also not covered by the warranty.
(4) If you need a dedicated charger for this device, please go to the counter to buy.
[Recommendation]: In order to ensure the smooth and long-term use of this product, it is
recommended that you buy a special charger for digital products.

Configuration Of New Device

Connect To Wi-Fi Network

1. Swipe down from the status bar to open the notifications bar or find "Wi-Fi" in Settings.
2. Turn on the "Wi-Fi"switch and the system will list all detected WiFi network.
3. Tap the Wi-Fi network you want to connect to. If you select an encrypted network, you will
need to enter password for access connection.

Connect To Bluetooth

1. Swipe down from the status bar to open the notifications panel or find "Bluetooth" in
Settings.
2. Turn on the "Bluetooth" switch. Enter the Bluetooth settings interface and search for
Bluetooth address.
3. Tap the name of the Bluetooth address you want to connect to and perform a pairing
connection.
All manuals and user guides at all-guides.com
3