Moneual MV-300 Mode D'emploi page 7

All manuals and user guides at all-guides.com
CLEAN THE DUST BARREL
1. Press the knob on the dust cup arm.
2. Lift dust barrel up.
3. Press knob on low end of dust barrel to open the dust barrel cover.
1 2 3
Removing & cleaning pre-motor filter, centric Hepa filter, and air outlet filter
Warning:
Always unplug the unit from electrical outlet before getting out the dust barrel.
a. Pre-motor filter
1. Press the knob on the dust cup arm.
2. Lift dust barrel up.
3. Take out the pre-motor filter for cleaning and changing.
Pre-motor filter
b. dual filter
1. Press the knob on the dust cup arm.
2. Lift dust barrel up.
3. Apart the dual filter and dust cup by referring the arrow indicator printed on the dust cup.
4. Use a soft brush to clean the dual filter then rinse it with clean water, dry it before replace it.
Note: please take the pre-motor filter out before rinse the dual filter.
Tips: how to detach the upper part from the reservoir
- 6 -