Sauder 412019 Instructions De Montage page 6

Step 2
Fasten two PLINTHS (T) to the ENDS (A and B). Tighten
å
two TWIST-LOCK® FASTENERS.
Use the lower large
hole in the PLINTH.
T
Curved edge
Dowel end
Page 6
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole
of the adjoining part.
NOTE: The dowel end of the FASTENER must remain
fully inserted in the hole of the adjoining part while
locking the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as
tight as possible.
T
Curved edge
A
B
412019
®
FASTENER
Dowel end
www.sauder.com/services