Télécharger Imprimer la page

FIBARO FGCD-001 Instructions D'installation page 10

Masquer les pouces Voir aussi pour FGCD-001:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
Warnings
This product is not a toy. Keep away from children and animals!
Failure to observe recommendations included in this manual may cause risk to
life and health or result in malfunction of the device.
The manufacturer, Fibar Group S.A. will not be held responsible for any loss or
damage resulting from not following instructions of the manuals.
Risk of malfunction as a result of tampering with the device.
The device should be installed below the ceiling level.
The device should not be installed: in a bathroom, next to heat sources, within
range of kids, obstructed from possible carbon monoxide sources, in direct sunlight.
The device is not a substitute for appropriate ventilation and exhaust systems.
Do not paint the device.
The device should be cleaned with a slightly damp cloth or moistened tissue.
Replace the device before date on the front or if sensor error is detected.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used bat-
teries according to the instructions.
Apparatus may not prevent the chronic effects of carbon monoxide exposure.
The apparatus will not fully safeguard individuals at special risk.
The remote alarm silencing function should only be used within sight of the ap-
paratus.
If there is any question as to the cause of an alarm, it should be assumed that the
alarm is due to a dangerous level of carbon monoxide and the dwelling should
be evacuated.
Place of installation (page 4)
Install the device on the wall, at least 30 cm (1 ft) away from the corner.
Recommended height of installation is dependant on the purpose of the room
and height at which head typically is.
10

Publicité

loading