Mixcder E10 Mode D'emploi page 5

5.Pairing with Wireless Devices
5-1 Pairing the headphones with a computer
Before pairing your headphones with your computer, make
sure your computer or laptop has audio wireless
capabilities. If not, you must purchase an audio wireless
dongle, preferably 2.1 or higher.
1.Make sure the headphones are off.
2.Turn on wireless capability on the computer.
3.The "Search new device" screen will be displayed.
4.Do not place both devices more than 3 ft/1 m away from
each other.
5.Press and hold the power button on the headphones until
it powers on but don't let go just yet. Continue holding down
on the power button until you see the LED indicator flashes
blue and red alternately, which means your headphones
are in "pairing mode" waiting to be paired with your device.
You will hear a prompt.
6.As soon as the computer system detects the new device,
please select "Mixcder E10" to pair. Once successfully
paired, the LED turns to solid blue. You will hear a prompt.
5-2 Pairing the headphones with a phone
1.Make sure the headphones are off.
2.Do not place both devices more than 3ft/1m away from
each other.
3.Press and hold the power button on the headphones until
it powers on but don't let go just yet. Continue holding
down on the power button until you see the LED indicator
flashes blue and red alternately, which means your
headphones are in "pairing mode"waiting to be paired with
your device. You will hear a prompt.
4.Turn on wireless capability on your phone and search for
new devices.
EN-4