Function Operation - Mixcder E10 Mode D'emploi

10. Protecting your Hearing
The headphones are held close to your ears, so loud sounds
pose a potential hearing risk. It is highly recommended that
setting low volume level before putting on the headphones
and avoiding exposing yourself continuously to high volumes.
If you need to use the headphones for a long period, rest ten
minutes for a half hour using.
11. Control Instructions
Function
Power on
Power off
Increase Increase
Pairing
volume volume
Increase
Decrease
volume
volume
Decrease
Play media
volume
Pause/restart
Play music/video
media playback
Pause/restart
Skip to next
music/video
track
Skip to next
Skip to previous
track
track
Skip to previous
track Answer a call
Answer a call
End a call
Noise Canceling
End a call
On
Active Noise
Cancelling (ANC)
On/OFF
Operation
When the headphones are off, press and hold the
power button for 3 seconds, and you will see the blue
light flash and hear "power on".
When the headphones are on, press and hold the power
button for 3 seconds, and you will hear "power off".
Press and hold the power button for about 5 seconds til the
When the headphone is on, press and hold the power button
Press the Volume Up V+ button
red and blue light flash alternatively, and you will hear "paring"
3 seconds, and the LED flashes red and sounds a prompt..
Press the Volume Down V- button
Press the Volume Up V+ button
Press the power button
Press the Volume Down V- button
Press the power button
Press the power button
Press the power button Press and hold the V+ button for 1-2s
Press and hold the V+ button for 1-2s
Press and hold the V- button for 1-2s
Press and hold the V- button for 1-2s
Press the power button to answer the call.
Press the power button
Press the power button
Press the Noise-Canceling Button to ON, Blue LED
Press the power button
light on.
1、ANC is on Once power on. LED lights up blue.
2.Press the ANC button agian to turn ANC off.
EN-8