Nakayama ET6100 Mode D'emploi page 6

EN
Fig. 6
Fig. 7
Fig. 9
Cleaning, maintenance, transportation and storage
CAUTION: All cleaning, transportation and maintenance must be done when machine stopped and unplugged.
Cleaning the grass trimmer
- After each use, remove the grass clippings under the guard.
- Regular cleaning after each use allows a better functioning and greater life of the trimmer.
- Maintain the surface of the unit with a soft damp cloth. Never clean plastic with a chemical that may damage.
CAUTION: Never immerse the of the trimmer electric wire in water or other liquids for cleaning. Never clean the unit with strong and high pressure or water.
Maintenance of grass trimmer
Apart from the regular cleaning, no special maintenance is required for this machine.
Transport and storage of the grass trimmer
- Unplug the machine is essential for storage and transportation.
- Store the trimmer in a dry, temperate and dark area that is out of the reach of children.
- It is not advisable to cover the trimmer wire with a tarp because it could cause an accumulation of moisture on the device and cause damage to the electric
motor.
6
The cutting position could be adjusted by pressing the button per Fig. 6.
Locking ring
Using the grass trimmer as edging function
You can use your grass trimmer with the cutting head in a vertical position using
edge function (Fig. 7). To do this, you simply unlock the locking ring from its normal
position by pulling up the locking ring of the lower tube and simultaneously turn
one full turn the lower tube for a new lock (Fig.8).
Fig. 8
Fig. 10
WWW.NIKOLAOUTOOLS.GR
Changing of wire spool
Unplug the machine before performing any work on the trimmer.
Unlock the tabs on spool cap as in Fig.9 and removing the empty
reel.
Replace the new full spool as shown in Fig 10.