Nakayama ET6100 Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
EN
Before using
- Study this manual thoroughly.
- Familiarize yourself with the operation of the grass trimmer and learn to use it properly.
- Never allow others (especially children) who have not read the manual to use the machine.
- If the unit must be given to other people, give them as this manual.
- Never remove the labels or security elements.
- Do not use the grass trimmer if the trigger on / off does not work properly. If necessary, contact your dealer for any repair.
- Check the condition of the adjustable handle and the spool wire, make sure the fixing parts are safe before each use. Replace them If worn or missing.
- Do not cut near other electrical machines.
- Never expose the electric grass trimmer to rain or moisture. Never allow water or other liquids enter the machine.
- Do not operate grass trimmer in an environment with flammable items such as liquids, gases or dust. The sparks generated by the operation of the
machine can cause an explosion.
- Check that the voltage and frequency indicated on the specification label affixed to the electrical grass trimmer correspond to the mains electricity supply.
- To connect the grass trimmer to the power, use only appropriate and compliant power equipment in perfect condition. Use a flexible extension,
brightly coloured for outdoor use with a maximum length of fifty meters with conductors of at least 12mm
- Keep the cord away from the radius of action of the machine and make sure it is not subjected to tension. Move the cable from water, heat and sharp
edges.
- Do not start cutting until the work area is cleared and cleaned. Keep the work area clean and tidy to reduce the risk of accident.
- Check the ground and remove the lawn glass, stone, wood, plastic, scrap metal, branches and other debris that may be thrown by the cutting edge wire
and damage the cutting system.
- During the first use, it is recommended that the user be accompanied by an experienced person.
- This grass trimmer is intended solely for trimming lawn edges and small grassed surfaces in private gardens. Any other use not permitted in this manual
use can lead to damage, can be a serious hazard to the user and is not permitted.
In particular, the machine should not be used:
- in an intensive way,
- for agriculture or forest maintenance.
- or trimming bushes and hedges.
- for grinding garden waste for compost
- To avoid any risk of explosion, do not operate the trimmer wire in an environment with flammable items such as liquids, gases or dust.
When using
- Use the trimmer only in daylight or good artificial light.
- Do not use when the grass is wet.
- The use of power equipment can be regulated. Remember to comply with legal regulations which may differ from one location to another.
- Do not use the machine if you are tired or ill. Also avoid use if you have consumed alcohol or taken drugs. A moment of inattention can result in serious
injury.
- When using, keep the hair away from the machine. Never wear loose clothing or accessories such as tie, cord, scarf or jewellery that could get caught in the
machine or in the cutting system such as neck ties, scarves or jewellery.
- Wear close-fitting clothing, convenient and protect you from cuts. Always wear long pants, sturdy and non-slip shoes, and protective equipment such as
gloves, goggles, a helmet with a visor and acoustic shield, etc.
- Do not allow anyone to remain in the range of the electric grass trimmer during use.
Keep people, children and animals away from work area. If it is a group work, keep sufficient distance between people.
- Make sure that the handles are clean and dry. When the machine is running, always firmly grip the front handle with your left hand and the rear handle
with your right hand.
- Always work in a stable balanced and firm position. Do not work on slippery or unstable ground. Firmly hold the grass waist with both hands. Put yourself in
a position that allows you to withstand the forces applied by a backlash. Never let go of the machine.
- Always begin cutting with the tool when it is on.
- When trimming, avoid obstacles such as fences, branches, stakes that can not be cut and that may damage the cutting system.
- Never operate a damaged machine repaired poorly, poorly fitted or changed arbitrarily.
- Do not overload the machine. Always use the proper equipment for the job.
- Hold the string head below the deflector. Hold the device in its normal operating position to position "stands edge" or parallel to the lawn to cut.
- Never install pieces metal cutting.
- Always keep hands and feet away from the cutting tool, especially when the machine is running.
WARNING: To reduce the time of exposure to vibration and noise, it is preferable to use the machine with frequent breaks, and limiting the duration of
continuous work.
WARNING: The vibration level during actual use of the tool can differ from the declared depending on how the tool is used total value, and the need to
identify security measures to protect the operator are based on an estimate of the exposure in the actual conditions of use, taking into account all parts of
the user such as the times when the tool is turned off and when it is running idle cycle.
After using
- Always unplug the unit before making any checking or maintenance.
- Do not carry the grass trimmer when it is not unplugged and completely stopped.
- Always follow the instructions provided for maintenance. After each use, check the operation of safety devices, setting, tension and condition of parts.
Maintain unit.
Replace worn or damaged parts.
- Do electric grass trimmer repair by qualified personnel. For safety reasons, use only original spare parts or approved by Nakayama.
- Keep the electric grass trimmer clean and keep it always disconnected in a dry place, away from direct sunlight and out of reach of Children.
- Keep this manual carefully and consult it whenever you use the machine.
4
WWW.NIKOLAOUTOOLS.GR

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

034278

Table des Matières