Hilti AG 125-15DB Mode D'emploi Original page 28

3.10 Front cover for the disc guard
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the standard guard with front cover.
3.11 DG-EX 125/5" dust hood for grinding (accessory)
The grinding system is suitable only for occasional use with diamond cup wheels for grinding mineral
materials.
CAUTION Use of this hood for working on metal is prohibited.
3.12 DC-EX 125/5"C dust hood for cutting (accessory)
Use the DC-EX 125/5"C dust hood when cutting masonry and concrete.
CAUTION Use of this hood for working on metal is prohibited.
4 Consumables
Use only synthetic-resin-bonded, fiber-reinforced discs with a maximum Ø of 125 mm approved for a
rotational speed of at least 11500 rpm and a peripheral speed of 80 m/s.
The maximum permissible grinding disc thickness is 6.4 mm and the maximum permissible cutting disc
thickness is 3 mm.
ATTENTION! When cutting or slitting with cutting discs, always use the standard guard with additional
front cover.
Discs
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Diamond grinding disc
Abrasive resin-fiber disc
Suitability of discs for the equipment used
Item Equipment
A Guard
B Front cover (in combination
with A)
C DG-EX 125/5" dust hood for
grinding
D DC-EX 125/5"C dust hood for
cutting (in combination with A)
E Side handle
F DCBG 125 hoop handle
(optional for E)
G Clamping nut
H Clamping flange
I Clamping nut for abrasive
resin-fiber disc (M14x1.5)
J Support plate
22 English
2
3
4
Application Designation
Cutting, slitting AC­D
Cutting, slitting DC-TP, DC-D (SPX,
SP, P)
Rough grinding AG­D, AF­D, AN­D
Rough grinding DG-CW (SPX, SP, P)
Rough grinding AP-D
AC­D AG­D,
AF­D,
AN­D
X X
X —
— —
— —
X X
X X
X X
X X
— —
— —
Material
Metal
Mineral
Metal
Mineral
Metal
DG-CW DC-TP,
(SPX, SP, DC-D (SPX,
P) SP, P)
X X
— X
X —
— X
X X
X X
X X
X X
— —
— —
2143515
AP-D
X
—
—
—
X
X
—
—
X
X
*2143515*