Ergo Fix 77200 Manuel D'instructions page 24

4. SET UP FOR OPERATION
Bolt the support leg to the log splitter, lift the log splitter by the handles at both
ends and place it on a 60 – 75 cm high, stable, flat and level work surface.
Familiarize yourself with the controls and features of this log splitter.
1. Motor
2. Push button switch
3. Work table
4. Wheel
5. Hydraulic control lever
6. Control lever guard
7. Pushbutton box
8. Work table extension
9. Work table
10. Wedge
11. Bleed screw
12. Transport handle
13. Oil drain bolt
14. Support leg
15. Hydraulic cylinder
22