Inventum MK010 Manuel D'utilisation page 39

6. Touch the function button to select a desired function (e.g. oven, microwave etc.).
7. Touch the up/down button or the slider to select the temperature.
8. Touch the clock/temperature button to set the time.
9. Touch the start/pause button to finish. The indicator for the delayed-start function on the display flashes.
When the delayed-start time finishes, you will hear a sound signal and the appliance starts.
USING THE INSERT LEVELS
The appliance has 5 insert levels to ensure that you can partly remove the grill rack or baking tray without tilting. As a
result, you can safely remove the dish from the appliance and the grill rack or baking tray will not accidentally fall
from the appliance.
Caution:
For safety reasons, the baking tray should be placed in one of the insert levels. Do not place the baking
tray on the bottom of the appliance.
1. Use the guide racks to correctly place the grill rack (A) or baking tray (B) in the appliance.
2. Make sure that the accessories are fully placed in the appliance and that they do not make contact with the door.
USING THE OVEN FUNCTION
For an overview of the available oven modes, refer to section
1. Touch the function button. The oven indicator shows the conventional mode.
2. Touch the function button again to select the desired oven mode. The oven indicator shows the selected mode.
3. Touch the up/down button or the slider to select the temperature.
4. Set the cooking time. Refer to section
5. Touch the start/pause button to start the appliance.
Note:
If you open the door of the appliance during cooking, you must touch the start/pause button to continue
the cooking.
USING THE QUICK-PREHEAT FUNCTION
You can use the quick-preheat function to quickly preheat the appliance to a set temperature.
Note:
The quick-preheat function cannot be used for automatic programs or dough proving (oven mode).
1. Touch the function button to select the desired oven mode.
Note:
If the mode does not support the quick-preheat function you will hear a sound signal.
2. Touch the quick-preheat button. The indicator for the quick-preheat function on the display is on.
When the appliance is preheated, a sound signal sounds and the indicator for the quick-preheat goes off. You
can now place your dish in the appliance.
USING THE MICROWAVE FUNCTION
Warning:
Only use materials that are suitable for use in a microwave oven.
'Oven modes'
'Setting the cooking time'
.
.
(Figure 8)
English • 39