SEA CCT 440 Manuel D'installation Et Programmation page 36

DESCRIPTION
DESCRIPTION
S.E.A. Società Elettromeccanica Arzignanese S.p.A.
MANUAL/SCAN
It indicates the way the screen data are displayed:
- Indication SWITCHED OFF. AUTOMATIC "Aut"
display mode. The power unit automatically shows
the channel measuring the highest temperature.
- Indication SWITCHED ON. MANUAL "Man" display
mode. The power unit permanently shows the set
channel. In order to change the channel, use the
keys ARROW UP or ARROW DOWN.
- FLASHING indication. SCAN "SCA" display mode.
The power unit cyclically shows the temperature
of each active measuring channel.
To exit, press the key AUTO/MANUAL/SCAN.
TMAX
It indicates the display mode of the temperature
highest value measured for each channel.
The TMAX function is activated by pressing at the
same time the keys AUTO/MANUAL/SCAN and
ENTER TEST. In order to change the displayed
channel, use the keys ARROW UP or ARROW DOWN.
In order to reset the maximum historical data, press
at the same time for 2 seconds the keys
AUTO/MANUAL/SCAN and ARROW UP. (In the panel,
the two keys are connected by the graphic reset
sign). To exit, press the key AUTO/MANUAL/SCAN.
36
ENGLISH
Page 12 of 25