SEA CCT 440 Manuel D'installation Et Programmation page 26

1 Purpose of instructions
This document represents the instruction manual for the installation and
programming of temperature control power units with CCT 440, CCT 441 and
CCT 442 microprocessor, used for electrical power machines, particularly
dry-type distribution transformers and air-type transformers. All the technical
staff involved in the installation, use and maintenance of dry-type
transformers should consider the instructions included in this manual in
order to obtain the best results and the maximum safety.
The manual must always accompany the equipment, it must be kept carefully
and made available to the whole staff involved in the installation, use and
maintenance.
2 General and safety information
This manual is only for qualified and trained technicians, both from a
technical and safety point of view. SEA will not be responsible for operations
carried out by people without the proper qualification.
The failure to respect the indications provided in these instructions for the
use and installation and programming operations carried out by unqualified
personnel and not in compliance with the given indications, can tamper with
the correct functioning of the equipment and the transformer.
In any case, SEA can be deemed responsible for consequences resulting
from the violation of the instructions contained in the manual or
consequences due to the lack of training by the professionals.
S.E.A. Società Elettromeccanica Arzignanese S.p.A.
 WARNING: BEFORE INSTALLING THE EQUIPMENT, MAKE ALWAYS
REFERENCE TO THE INSTRUCTION MANUAL AND TO THE TECHNICAL
DATA!
THIS MANUAL IS DEVOTED TO TECHNICAL, PROPERLY TRAINED, STAFF.

26
ENGLISH
Page 2 of 25