Troubleshooting; Reset Your Device - AIPTEK PocketCinema V60 Guide De L'utilisateur

User's Manual

Troubleshooting

If your projector does not seem to be functioning properly, check the items below before
you contact an authorized service center.
Symptom
The projector does not
work when connecting
to a notebook PC.
The projected image is
too dark.
The projected image is
blur.
The surface
temperature of projector
is high.

Reset Your Device

Occasionally, you may need to reset your Micro
Projector.
This can be useful when a program is not performing
properly. Push the Power switch downward for 10
seconds to RESET your device.
1. Check if the HDMI cable is plugged correctly.
2. Make sure the PC has been switched to projector
display.
1. Use the projector in a darker environment.
2. Increase the brightness by using the AC power
adapter.
3. Scale down the projectional image size.
1. Adjust the focus. Please refer to "Adjusting the Focus".
2. Check if the protection film is removed. Or, check if the
lens is dirty.
Because of the high-luminance LED, it is normal that this
projector generates heat in long-time use. It will not affect
the performance of the projector. Always keep the
ventilation slots free of dirt or obstructions and operate the
projector in a properly ventilated environment.
Page 18
Check Point