Herth+Buss AirGuard Notice D'emploi page 77

All manuals and user guides at all-guides.com
Operating Instruction
8.0 Settings
8.1 Setting the AirGuard device
Press the back button to open the settings
menu from the manufacturer selection.
TIP
Use the arrow buttons to browse
through the settings and change the pa-
rameterswiththeconfirmationbutton.
Language:
Press the enter key to select the preferred
language.
Number of wheels:
Ifyouwanttoonlyreadcertainsensorsin-
dividually, select the value 1. If you want
the AirGuard to save the sensor data for the
print function, select the value 4.
77
Please note: Select the value 4 for
the "ID to PC" function.
Temperature:
Press the enter key to switch between Fº
or Cº
Pressure:
Press the enter key to switch between bar,
PSI and kPa.
95990001
EN