Herth+Buss AirGuard Notice D'emploi page 54

Operating Instruction
Function selection:
Use the arrow buttons to select DIAGNOSE
EN
SENSORandpresstheenterkeyforthedi-
agnosis.
Readout of sensor in setting Wheel: 1
The AirGuard will now read out the sensor.
The sensor reaction time may vary accord-
ing to sensor type and brand.A successful
read-outisconfirmedwithabeep.
The following image is an example of the
datadisplayofasensorthathasbeenread.
Vehicletype
Sensor ID
Tyre
temperature
(°C/°F)
www.herthundbuss.com
All manuals and user guides at all-guides.com
Tyrepressure
(psi/bar/kPa)
Batterystatus
Sensorfrequency
TIP
Renewed pressing of the Enter
keystartstheactivationprocessfor
"sleeping" sensors. Example: After
lengthyperiodsofinactivitythesensors
switchtorestmodetosavethebattery.
Please note:
The AirGuard does not interpret any
sensor values. It gives the sensor data
according to the OE protocol of the
respective vehicle. Not all sensors
transfer the displayed information.
Readout of several sensors in setting
Wheel: 4
Thedisplayshowsavehiclepictogram.The
up/down keys on the device can then be
usedtoselectthetyreyouwishtoreadout.
Thisalsoincludesthesparetyre.
A flashing display means that there is no
stored data for the tyre. A steady display
meansthatdatahavealreadybeenreadout
andstoredforthetyre.
Itisthusalwayspossibletoseewhichtyres
have been dealt with so far.
95990001
54