PSI Woodworking Products PK4XXX Guide Rapide

#PK4XXX
4 in 1 Multi Function Pen Kit
Kit Features:
• Four Writing Instruments in One!
• "Magic" Selection Mechanism
• Easy to Turn With Straight Tubes
• Minimal Parts--easy to assemble
• Available in multiple fi nishes
• Overall Length: 5-13/16"
• USES REFILLS:
#PKMINI-R5 (Black)
#PKMINI-R5R (Red)
#RF4110 (Blue)
• Lead Size: 0.7mm
Required Accessories:
• 7mm Pen Mandrel
• Drill Bit:10mm #PK10-10 for wood, #PK-10MMSGfor plastic
• Bushing Set (2 pc): #PKVESBU
• Barrel Trimming set: #PKTRIM10 or 10mm sleeve from PKTRIMSET.
• Live Tailstock or Mandrel Saver
• 2 part Epoxy or Thick CA (Cyanoacrylate) Glue
• Pen Blank Minimum Size: 5/8" x 5/8" x 2-3/16"L
Tip
Mini Pen Refi lls (3) Red, Black, Blue
Preparing the Blank:
• Cut blank to the to the length of the tube, adding 1/16" for squaring off.
• Drill 10mm hole lengthwise through the blank.
• Spread glue over tube, insert the tube into the blank with a twisting motion to spread the glue evenly inside.
• Center the tube lengthwise inside the blank.
• When the glue is dry, square the ends of the blanks, making sure the trimmed ends are 90º to the tube. Use a
10mm barrel trimmer, or a pen blank squaring jig with a 10mm sleeve on a disc sander. Take the excess material
down fl ush to the ends of the tubes. Do not trim past the end of the tube since this may interfere with the operation of
the mechanism and assembly. Use a barrel trimmer to clean the inside of the tube.
DIAGRAM A / PARTS LAYOUT
Tube - 2.148 (2-5/32")
Refi ll holders
Coupler
Upper Assembly
Pencil Mechanism
PSI Woodworking Products PSI Woodworking Products
Release Button