PSI Woodworking Products PKFP55 Serie Mode D'emploi

#PKFP55XX • #PKFP56XX
The Vertex Supreme
Roller & Fountain Pen Kit
PKFP5500 PKFP5510
•
PKFP5610 PKFP5640
•
Kit Features:
• Matching Fountain Pen and Rollerball
• Easy to turn with straight tubes
• Minimum parts - easy to assemble
• Available in multiple finishes
• Overall Length: 5-5/8" Long
• Vertex Hex Styling
• Magnetic posting front & rear
• Uses Quality Rollerball refill
• Fountain nib made in Germany.
Required Accessories:
• 7mm, Pen Mandrel
• Drill Bit(s) 10.5 mm #PK105mm and 12.5mm #PKPLI-DB
• #PKGRAD2BU Bushing set(3 pc)
• 7mm Barrel Trimmer #PKTRIM7 w/ Barrel Trimming sleeve #PKMAJJRBTS
• Live Tailstock Center
• 2 Part Epoxy Glue or Insta Cure (Cyanoacrylate) Glue
• Pen Blank: Minimum Size - 3/4" x 4-3/4"
Upper Tube/
Barrel
Clip Assembly
1-11/16"
Ink Pump
Preparing the Blank:
• Cut 2, 3/4" blanks to length of the tube(s) and add 1/16" for squaring off.
• Drill holes lengthwise through the blanks. (12.5mm Upper blank, 10.5mm for lower blank)
• Spread glue over the tube(s), insert each tube with a twisting motion to spread the glue evenly inside.
Center the tubes lengthwise inside the blanks.
• When the glue is dry, square the ends of the blanks. You can use a 7mm barrel trimmer with the proper sleeve,
or a universal pen blank squaring jig with a power disc sander. Take the excess material down flush with the
ends of the brass tube. (Do not trim beyond the length of the tube since this may interfere with
operation of the mechanism and assembly).
PKFP5540 PKFP5600
• •
DIAGRAM A / PARTS LAYOUT
Magnetic
Decor
Band
Ring
Roller Tip
Tip Protector
Fountain Nib
•
Lower Tube/
Barrel
Coupler
Refill
Spring
PSI Woodworking Products
Coupler
2-5/8"
Lower
Cap