AMQ Activ Guide D'assemblage page 8

Phase 3 | Attaching Cantilevers
Step 1
Insert Cantilevers on each end, lifting the leg
a bit, if needed, to ease into a flush fit. Tab
into place (fit is snug).
Activ-Pro Assembly Guide | 8
Step 2
Using M6 screws, tighten all 4 holes lightly. Once
level, go back through and tighten each screw
completely. Place plastic caps over each screw.
M6 screws
use 5mm
allen key
Use screw
caps
amqsolutions.com