On/Off Power; Setting The Temperature Control; Storage - Avanti BCA516SS Manuel D'instructions

It is recommended you install the beverage cooler in a place where the ambient temperature is
between 19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in extreme
cold or hot conditions may cause interior temperatures to fluctuate. The range of 3 18 37ºF-
65ºF) may not be reached.

ON/OFF Power

To turn OFF the appliance, press the button and hold 2 seconds.

Setting the temperature control

You can select temperature display setting from Fahrenheit to Celsius degree by touching the
button. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display
window.
If you desire to change the temperature, set the temperature as you desire by touching the or
button. First press the button. The numbers in the display window will flash. The temperature that
you desire to set will increase 1ºF or 1ºC if you touch the button once; on the contrary the
temperature will decrease 1ºF or 1ºC if you touch the button once.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the beverage cooler will not start.
When you use the appliance for the first time or restart the appliance after having been shut off for a
long time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and it is due to the length of the activation time. Once
the beverage cooler is running for a few hours everything will be back to normal.
Ø STORAGE
Many cans and bottles may differ in size and dimensions. As such the actual number of bottles you
may be able to store may vary.
10