Installation Instructions - Sylvania ValueLED 3A Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

UNIVERSAL MOUNTING BRACKET (Figure 1):

INSTALLATION INSTRUCTIONS:

Mounting with Slipfitter Mount :
1. Remove parts two, four, five, and six from the universal mounting bracket included in the box.
2. Loosen the four locking bolts (part 8 of figure 1) on slipfitter bracket, make all wiring connections via the supplied wire leads
in accordance with NEC and local codes, and pull the wires completely into the pole (figure 2) or junction box (junction can
box can be accessed through part 3 of figure 1).
3. Slip the mounting bracket over the pole tenon and tighten the four locking bolts to secure. (Figure 3)
4. The slipfitter bracket allows the luminaire to be adjusted up to 90° above horizontal (Figure 2). Loosen the adjustment bolt and
adjust tilt as needed and tighten adjustment bolt to lock in place.
Figure 2
Figure 3
3983099

Publicité

Table des Matières
loading

Table des Matières