Publicité
Les langues disponibles
Les langues disponibles
SYLVANIA
Luminaires
ValueLED Dual Selectable Dusk to
Dawn
Ideal for retrofit applications and new
constructions, the SYLVANIA ValueLED Dusk to
Dawn luminaire is suited for general area lighting,
yards, docks, barns, service roads, and security
lighting. This luminaire is dual selectable offering 3
wattages (18, 36, and 55W ) as well as 3 CCTs
(3000K, 4000K, and 5000K). It utilizes a traditional
appearance while also offering all of the benefits
of the latest LED technology.
For warranty coverage, please register at www.ledvanceUS.com
Please Read All Instructions Before Attempting Installation
−
TO PREVENT PERSONAL INJURY OR PRODUCT DAMAGE ONLY LICENSED ELECTRICIANS SHOULD PROVIDE ALL INSTALLATION SERVICES.
−
TO AVOID ELECTRIC SHOCK OR COMPONENT DAMAGE DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION OR SERVICING.
−
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE (NEC) AND ALL APPLICABLE FEDERAL, STATE AND LOCAL ELECTRIC
CODES AND SAFETY STANDARDS.
USE ONLY UL (OR OTHER NTRL) APPROVED WIRE FOR INPUT / OUTPUT CONNECTIONS. MINIMUM SIZE 18 AWG OR 14 AWG FOR CONTINUOUS RUNS.
−
−
ALL LEDS AND DRIVERS MUST BE COOL TO THE TOUCH WHEN PERFORMING MAINTENANCE.
−
CONFIRM THE SUPPLY VOLTAGE IS THE SAME AS THE RATED VOLTAGE OF THE LUMINAIRE.
−
DO NOT INSTALL IN A HAZARDOUS ATMOSPHERE
−
KEEP TIGHTLY CLOSED WHEN IN OPERATION
−
USE MIN 75
C SUPPLY CONDUCTORS.
°
−
ANY ALTERATION OR MODIFICATION OF THIS PRODUCT IS EXPRESSLY FORBIDDEN AS IT MAY CAUSE SERIOUS PERSONAL INJURY, DEATH, PROPERTY DAMAGE
AND/OR PRODUCT MALFUNCTION.
TO PREVENT PRODUCT MALFUNCTION AND / OR ELECTRICAL SHOCK THIS PRODUCT MUST BE PROPERLY GROUNDED.
−
−
THIS LUMINAIRE IS DESIGNED TO OPERATE IN AMBIENT TEMPERATURES RANGING FROM -40°F TO +104°F (-40°C TO +40°C).
4070567
WARNING
Publicité
Table des Matières
Manuels Connexes pour Sylvania ValueLED Dusk to Dawn
Sommaire des Matières pour Sylvania ValueLED Dusk to Dawn
- Page 1 ValueLED Dual Selectable Dusk to Dawn Ideal for retrofit applications and new constructions, the SYLVANIA ValueLED Dusk to Dawn luminaire is suited for general area lighting, yards, docks, barns, service roads, and security lighting. This luminaire is dual selectable offering 3 wattages (18, 36, and 55W ) as well as 3 CCTs (3000K, 4000K, and 5000K).
-
Page 2: Safety Precautions
Safety Precautions: Important: Read carefully before installing the fixture. Retain for future reference. General: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier. All models will ship preset at 4000K and 55W with the photocell enabled. CCT / Wattage Front View Side View... - Page 3 Mounting using Extension Arm: Assemble mounting bracket. (see Figure 3) Insert arm into mounting bracket and tighten bracket until arm is held firmly in place. Remove bracket from bottom of luminaire. Feed supply wires (provided by others) up arm. Make wiring connections. (see Wiring Diagram) Install fixture onto arm by re-securing bracket removed in step 2.
-
Page 4: Luminaires
ValueLED Dual Selectable Dusk to Dawn Idéal pour les applications de rénovation et les nouvelles constructions, le luminaire SYLVANIA ValueLED Dusk to Dawn est adapté à l’éclairage général, aux chantiers, aux quais, aux granges, aux routes de service et à l’éclairage de sécurité. -
Page 5: Installation Standard
Important: Lisez attentivement avant d’installer le luminaire. Conserver pour référence future. Généralités: À la réception de l’appareil, inspectez soigneusement tout dommage de fret qui devrait être porté à l’attention du transporteur de livraison. Chaque modèle sera livré a 4000K et 55W CCT/Wattage Interrupteur Devant Profil... - Page 6 Montage à l’aide d’un bras d’extension : Assemblez le support de montage. (voir la figure 3) Insérez le bras dans le support de montage et serrez le support jusqu’à ce que le bras soit fermement maintenu en place. Retirez le support du bas du luminaire. Fils d’alimentation (fournis par d’autres) bras en haut.