Operation; Important; Start The Machine; Stop The Machine - GreenWorks 21142 Manuel D'opérateur

EN
5. Tighten the auxiliary handle with the wing nut.
BOLT
10

OPERATION

Before you operate the machine, read and understand the
safety regulations and the operation instructions.
Be careful when you operate the machine.
10.1

START THE MACHINE

1. Form a loop with the end of the extension cord.
2. Put the loop portion of the extension cord through the slot
on the rear handle and put it over the cord retainer.
3. Pull loop against cord retainer until the slack is removed.
4. Attach the outlet end of an extension cord to the plug on
the rear of the machine.
WING NUT
WASHER

IMPORTANT

WARNING
English
10.2 START THE MACHINE
1. Push the lock-out button (2) and pull the trigger (1). Once
the machine is running you can release the lock-out
button.
10.3

STOP THE MACHINE

1. Release the trigger to stop the machine.
10.4

OPERATION TIPS

Keep clearance between the body and the machine.
Do not operate the machine without guard in place.
Do these tips when you use the machine
• Keep the machine connected to the correctly worn
harness.
• Keep a firm hold with the two hands on the machine
while you operate the machine.
• Cut tall grass from the top down.
If grass winds around the trimmer head:
• Stop the machine.
• Unplug the machine.
• Remove the grass.
8
2
1
WARNING
WARNING