hawa Junior 80 GP Instructions De Conception Et De Montage page 4

Hawa Junior 80/100 GP
English
Intended use
Sliding door fitting for all-glass sliding doors with top fixed suspension.
Intended place of use
Dry internal areas and internal areas where condensation can occur: for instance in kitchens or bathrooms, but without any
significant occurrence of chloride.
Technical data
Hawa Junior 80 GP
Max. door weight
Hawa Junior 80/100 GP
Glass thickness sliding door ESG
Glass thickness sliding door VSG
Glass thickness fixed glass: ESG/VSG 8–12 mm ( "- "), with silicone up to 13 mm ( ")
Both fully tempered monolithic safety glass and fully tempered laminated safety glass can be used.
All glass edges are seamed; 1 mm ( ") x 45° in the glass cutout.
Fully tempered laminated glass permissible with max. offset of 2 mm ( ") in the glass cutout.
ESG Fully tempered monolithic safety glass with a minimum surface compression of 15,000 psi (DIN EN 12150-1)
VSG Fully tempered laminated safety glass according to DIN EN 14449
Certificates are available for downloading at www.products.hawa.com.
Article number
5-digit or 10-digit numbers identify a Hawa article.
General notes
The document «Safety Notes» (22991) is an integral part of these planning and assembly instructions.
Metric measurements apply - those in inches are for information only.
Retain the instructions. Replacements available from www.products.hawa.com.
Risk
The fitting does not pose a risk if it is installed properly by an expert.
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
4/24
80 kg (176 lbs.)
8/10/12/12,7 mm ( "/ "/ "/ "), thickness tolerance ± 0,3 mm
2x4 ± 0,2 mm ESG
2x5 ± 0,2 mm ESG
2x6 ± 0,2 mm ESG
5 15
---- - ---- -
16 32
1
---- -
16
Hawa Junior 100 GP
Max. door weight
5 13 15 1
---- - ---- - ---- - - -
16 32 32 2
→
film thickness 0,38 / 0,76 / 1,52 mm
→
film thickness 0,38 / 0,76 / 1,52 mm
→
film thickness 0,38 / 0,76 mm
17
---- -
32
3
---- -
32
100 kg (220 lbs.)