Dörr PS-16737 Mode D'emploi page 9

USAGE
Charging the Li-Ion battery
Before fi rst use, please charge the supplied Li-Ion battery. For charging turn the torch
middle section (3) downwards. Below the middle section you will fi nd the Micro USB
port (4). Connect the torch to your computer using the supplied USB cable. While char-
ging, the LED indicator (5) lights up red. After approx. 5 hours the Li-Ion battery is fully
charged and the LED indicator (5) lights up green.
Replacing the Li-Ion battery
Screw-o the screw cap (2) counter clockwise. Insert an appropriate Li-Ion battery type
18650 according to the polarity (+/-) and screw on the cap again.
Turn On/O the torch
To turn On/O the torch press the rubberized On/O button (1) at the bottom of the torch.
Brightness/Flashing modes
To adjust the brightness or for selecting the fl ashing mode press the On/O button (1) in
quick succession as follows:
Press 1x 100% brightness
Press 2x 50% brightness
Press 3x 25% brightness
Press 4x fl ashing mode
Press 5x SOS fl ashing mode
Silent Mode
For silent mode the torch must be turned o . Slightly press the On/O button (1), without
pushing it down completely and without the audible click sound. By pressing slightly
again, the torch will switch through the functions like described above. During silent
mode you have to press constantly the On/O button (1) slightly.
Zoom function
To zoom the light beam slide the zoom head (6) forwards or backwards.
CLEANING
Never use aggressive cleansing agents or benzine to clean the torch. We recommend
a soft microfi ber cloth to clean the outer parts of the torch.
9