Table des Matières
Publicité
Double-tone
When the double-tone function is enabled, "Double" will show on the screen.
Under this mode, you can obtain an overlaid tone effect. Press [Tone] to shift
between Tone 1 and Tone 2 as needed, and the corresponding "TONE 1" and
"TONE 2" will show on the screen.
Keyboard splitting
When enabling the Split function, "Split" will show on the screen. 24 keys on
the left will split from the keyboard, while the left keyboard zone will increase
by one octave and maintain the original tone.
Touch
Press [Touch] to enable or disenable the touch function. This function is
defaulted to be enabled, and "Touch" shows on the screen. With this function,
you may enhance the expression of the melody. It may accurately reflect the
force you need to apply on each note. The larger the force is, the louder the
sound will be. When this function is enabled, the sound will be equal regardless
of what the force you apply.
RECORDING
Recording
Press [Record] to enable the recording function, and "Record" will show on the
screen. Under this mode all notes played will be recorded. The recorded notes
will be cleaned upon recording or shutdown of the keyboard.
Stop recording
•
When the storage is full, "Full" will show on the screen, and recording will
stop automatically.
•
During the recording process, you can press [PLAY] to stop recording and
play the recorded notes.
•
Press [REC] to disenable the recording function, and all recorded notes
will be cleaned.
Records playback
•
When the recording function is enabled, press the [PLAY] to playback the
record.
•
During playback process, you can press [PLAY] again to stop playback.
EN
31
Publicité
Table des Matières
