Table des Matières
Publicité
EN
EFFECT CONTROL
Transposing
With the transposing function, you can play music of other tunes with C-tune
fingering method. Press [Transpose ] to decrease the tone by half (minor
second), and the tune in C-tune keyboard zone will change to B-tune. Press
[Transpose
] to increase the tone by half (minor second), and the tune
in C-tune keyboard zone will change to #C tune or bD tune. By pressing
[Transpose ] twice, C-tune will shift to bB-tune; by pressing [Transpose
]
five times, C-tune will shift to F-tune. Press [Transpose
] and [Transpose ] at
the same time to reset to C-tune "0". Press [Transpose
] and [Transpose ] to
adjust the level from "-6" to"6".
Tuning
You can press [TUNING
] / [TUNING ] to conduct fine pitch correction by
adjusting the fine adjustment level from "-99" to „99". Press the two buttons
at the same time to reset to the default "00", and the it will back to the normal
standard keyboard. This function is quite useful for tune correction during
band ensemble.
Sustain
Press [Sustain], "SUS" will show on the screen, and the sustain effect will be
activated. Press [Sustain] again to disenable the sustain function, and "SUS"
will disappear from the screen.
Pitch bend
The pitch bend can realize tonal variation. You can increase the pitch by
turning up the pitch bend and decrease the pitch by turning down the same.
When released, the pitch bend will go back to the center position, and the
pitch will return to the standard state.
Vibrato
When [ Vibrato ] is in the low position, the Vibrato function is disenabled.
You can enable this function by turning up the bar, and 'VIB' will show on
the screen. The Vibrato function can add vibrato effect for the instruments.
You can increase or reduce the vibrator effect by tuning up or turning down
[Vibrato].
30
Publicité
Table des Matières
