Busch-Jaeger 6550 Mode D'emploi page 53

Operation
Operation with Busch Watchdog
Type Designation in Busch Watchdog
In these Operating Instructions, not only the Busch
®
Watchdog
also the Comfort Sensor (Art. No. 6800-xxx-10x(M)) are
referred to as "FM Sensors". Pay attention to the correct
type allocation in each case in the description.
The type designation is to be found on the back of the
respective device.
After interruption of the supply voltage or connection to the
supply, irrespective of the brightness set on the Sensor,
the Memory Pushbutton Controller switches the connected
consumers on
– for 80 seconds when FM Sensors 6810-21x-10x are
used;
– for the time set (at least 1 minute with time settings of
< 1 minute) - with the exception of short-time impulse
when FM Sensors 6800-xxx-104(M), or higher, are
used.
Standard Sensor (Art. No. 6810-21x-10x), but
ENG
®
FM Sensors
®
Program
53