Lorell LLR60600 Mode D'emploi

LLR60600/60601/60227/60228_052405
4
2R
5,8
5,8
3
6,9
Before You Begin:
Open, identify and count all parts prior to assembly. Lay out the parts on
a non-abrasive surface such as a carpet or blanket. You will need the tools identified below:
1. Phillips Head Screw Driver
2. Allen Wrench (Provided)
STEP 1 Attach Front Frame (1L & 1R) to Seat Cushion (3) using two 3 1 " Screws (6) and two Large Washers (9) for each frame. (SEE DETAIL A)
/
2
DO NOT TIGHTEN SCREWS
STEP 2 Attach Rear Frame (2) to Seat Cushion (3) using two 2" Screws (7) and two Large Washers (9) for each frame. (SEE DETAIL A)
DO NOT TIGHTEN SCREWS
STEP 3 Insert Back Cushion (4) onto Metal Brackets (10) of Front Frame (1L & 1R) and Rear Frame (2) using six 1" Screws (5) and six Small Washers (8).
FULLY TIGHTEN ALL SCREWS.
STEP 4
Attach fabric under seat to velcro.
NOTE: MODEL TV231 CASTERS ARE PRE-INSTALLED
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
LLR60600/60601/60227/60228_052405
5,8
1L
6,9
HARDWARE IDENTIFICATION
PART QTY
1. Front Frame (1L & 1R) . . . . . . . 2
2. Rear Frame . . . . . . . . . . . . . . . 2
3. Seat Cushion . . . . . . . . . . . . . . 1
4. Back Cushion . . . . . . . . . . . . . 1
5. 1" Screws . . . . . . . . . . . . . . . . . 6
6. 3 1 / " Screws . . . . . . . . . . . . . . 4
2
7. 2" Screws . . . . . . . . . . . . . . . . . 4
8. Small Washers. . . . . . . . . . . . . 6
9. Large Washers. . . . . . . . . . . . . 8
10. Metal Brackets . . . . . . . . . . . 4
11. Allen Wrench (not shown) . . . 1
LLR60600/60601/60227/60228_052405
OPERATING INSTRUCTIONS
Traditional Chair
LLR60600/60227
Traditional Guest Chair
with Casters
LLR60601/60228
IF YOU ARE MISSING PARTS OR HAVE OTHER CONCERNS PLEASE
CALL OUR TOLL FREE NUMBER:
1-888-295-5839 OR EMAIL: Alex.True@sprich.com.
MONDAY-FRIDAY 9:00 AM TO 4:00 P.M. - EASTERN STANDARD TIME
Please provide the following information:
1. Full Name
2. Physical Address - Please do not include a P.O. Box as our carriers
cannot deliver to a P.O. Box Address.
3. Phone Number
4. Model Number
5. Part Number
6. Quantity
7. Reason for the request
Note: Our policy is to send all parts requests with normal ground
transportation, if your requirements are to have these parts sent via
overnight or next day, please provide your designated carrier and account
number.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
six months or as needed.
4. Dispose of packing material properly. Do not
use plastic cover as head covering. It may cause
suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.