Leveling The Ice Machine; Leg Option; Drain Pump Option; Before Starting The Ice Machine - Manitowoc CrystalCraft Premier USE0050 Manuel D'installation, D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section 2

LEVELING THE ICE MACHINE

1. Adjust the levelers close to desired height.
2. Move the bin into its final position.
3. Level the ice machine to assure that the bin door closes
and seals properly. Use a level on top of the bin. Turn the
base of each foot as necessary to level the bin.

LEG OPTION

1.Remove leg levelers from the bottom of the ice machine.
2.Screw legs into the bottom of the ice machine.
3.Screw the foot of each leg in as far as possible.
4.Move ice machine to final position.
5.Level the ice machine to assure that the bin door closes
and seals properly. Use a level on top of the bin. Turn the
base of each foot as necessary to level the bin.
Part Number 000016662 Rev Rev 01 01/22

DRAIN PUMP OPTION

Disconnect power to ice machine before proceeding.
1.Remove top cover screws and slide cover off. Remove back
panel screws and lift panel off.
2.Assemble the outlet tube and vent tube to the drain pump.
3.Plug the drain pump's wire assembly into the ice machine's
wire assembly. Slide drain pump into cavity.
4.Swap out existing Bin Drain Tube for Bin Drain Tube
packaged with drain pump.
5.Route the vent tube and outlet tube.
6.Reassemble ice machine.
NOTE: See instructions packaged with drain pump for details.
Upon activation, be sure to check all connections for water
leakage.

Before Starting the Ice Machine

The ice machine must be sanitized before making ice.
To ensure proper operation, follow the Operational Checks
in Section 3 of this manual. Starting the ice machine and
completing the Operational Checks are the responsibilities of
the owner/operator.
Adjustments and maintenance procedures outlined in this
manual are not covered by the warranty.

Operational Checks

Normally, new installations do not require any adjustment.
To ensure proper operation, always follow the Operational
Checks:
• when starting the ice machine for the first time
• after a prolonged out of service period
• after cleaning and sanitizing
NOTE: Routine adjustments and maintenance procedures are
not covered by the warranty.

WATER LEVEL

The ice machine maintains the correct water level. The water
level is not adjustable.
Installation
13

Publicité

Table des Matières
loading

Table des Matières