Grandstream GWN7610 Mode D'emploi page 6

5. Align the arrow on the GWN7610AP with the arrow on the locking tab of the mounting
bracket and ensure that your GWN is firmly seated on the mounting bracket and connect
the network and power cables.
6.Turn the GWN clockwise until it locks into place and fits the locking tab.
Note: Ceiling mounting is recommended for optimal coverage performance.
7
All manuals and user guides at all-guides.com
POWERING AND CONNECTING THE GWN7610
GWN7610 can be powered on using PoE/PoE+ switch using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of the GWN7610
Step 2: Plug the other end into the uplink port of the power over Ethernet (PoE) switch.
Network
Port
RJ45 Ethernet Cable
to Power over Ethernet
(PoE) Switch
8