Publicité
Step 15
Step
Place your unit into its fi nal position against a wall.
å
Push the RUBBER SLEEVES (MM) over the METAL PINS (LL).
å
Insert the METAL PINS into the hole locations of your choice in
the ENDS (A and B). Set the ADJUSTABLE SHELF (I) onto the
METAL PINS.
Set the ROD (V) onto the ROD HANGERS on the ENDS (A and B).
å
To insert the drawer into your unit, tip the front of the drawer down
å
and drop the rollers on the drawer behind the rollers on the unit.
Lift the front of the drawer up and slide it into the unit.
To make adjustments to the drawer, loosen the SCREWS in the
å
DRAWER FRONT BRACKETS, make needed adjustments, and
tighten the SCREWS.
Page 20
LL
MM
(4 used)
411802
V
B
I
www.sauder.com/services
A
Publicité
