MOUNTING AN ENCLOSURE
NOTE: Thread each screw a minimum of three full
rotations before mounting
Install remaining screws and hand tighten all
FRONT DOOR OPERATION
NOTE: Rear Door on 4RU enclosure operates
identically
To open the Front Door:
1. Push Release Latches downward
2. Open Door
REAR DOOR OPERATION (1RU, 2RU and 3RU ONLY)
NOTE: Ensure plungers are dis-engaged prior to
installation of lid
To remove the Rear Door:
1. Pull plungers out to dis-engage
2. Remove lid rearward
Page 5 of 30