Before Assembly - Carlson 0800 G DS Mode D'emploi

Before Assembly

F
A
D
E
C
F
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
A
Top end cap (1)
B
Top handle end cap (1)
C Bottom end cap (1)
D Outer leg tube (2)
E Inner leg tube (2)
BEFORE USING PRODUCT
Read and follow all instructions carefully to ensure that your gate is
properly installed. Improper installation could result in the gate
becoming unstable or dislodged from the doorway. The safety of
your child or pet is your responsibility. Please keep these instructions
for your reference.
REMOVING YOUR GATE FROM THE WALL
To remove from wall, turn top and bottom handle counterclockwise to
release pressure from wall.
G
G
F
Outer tube (2)
Middle tube (2)
G
H Bottom handle end cap (1)
Mesh (1)
I
B
D
E
H
CARE AND MAINTENANCE
Periodically check the gate for signs of damage, wear, or missing
components. Do not use if any part is missing, worn or damaged.
Check the gate regularly to ensure all the hardware and mountings are
tightened. Do not use abrasive cleaners or bleach. Clean by sponging with
warm water and a mild detergent.
90 DAYS LIMITED WARRANTY
If, during the first 90 days after consumer purchase of the item, under
reasonable and non-commercial use and conditions of maintenance, it fails
while owned by the original purchaser because of the quality of materials
or workmanship of finish and assembly, Carlson Pet Products, Inc. will
replace or repair it at Carlson's option. PROOF OF PURCHASE REQUIRED.
English
I
NOTE
MAX SIZE
27.5 50 in, 28 in tall