Before Assembly - Carlson 1000 Mode D'emploi

Before Assembly

A
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
A
Main Base (1)
B Top Base (1)
C Side Supports (2)
D Side Connectors (6)
BEFORE USING PRODUCT
Read and follow all instructions carefully to ensure that your product
is properly installed. Failure to follow these instructions for the
assembly of use of your product could result in serious injury or
death. The safety of your pet/child is your responsibility. Please keep
these instructions for your reference.
CARE AND MAINTENANCE
Periodically check the product for signs of damage, wear, or missing
components. Do not use if any part is missing, worn or damaged. Do
not use abrasive cleaners or bleach to clean your product.
B
E
Bottom Connectors (2)
Pad Holder (2)
F
G Scratch Pad (1)
C
F
90 DAYS LIMITED WARRANTY
If, during the first 90 days after consumer purchase of the item, under
reasonable and non-commercial use and conditions of maintenance,
it fails while owned by the original purchaser because of the quality of
materials or workmanship of finish and assembly, Carlson Pet
Products, Inc. will replace or repair it at Carlson's option. PROOF OF
PURCHASE REQUIRED.
English
D E
G