Magic remote functions
When the message "Magic remote battery is low. Change the battery." is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching the
and
ends to the label inside the compartment,
and close the battery cover. Be sure to point the magic remote toward
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse.
It is recommended that an Access Point (AP) be located more than
0.2 m away from the TV. If the AP is installed closer than 0.2 m the
Magic remote may not work properly due to frequency interference.
• Some buttons and services may not be provided depending on
models or regions.
A
(POWER) Turns the TV on or off.
You can turn your set-top box on or off by adding the set-top
box to the universal remote control for your TV.
Number buttons Enters numbers.
Alphabet buttons Enters letters.
(Space) Opens an empty space on the screen keyboard.
Accesses the saved programmes list.
(Screen Remote) Displays the Screen Remote.
- Accesses the Universal Control Menu.
* You can access apps or Live TV using the number
buttons corresponding to the features.
* Audio descriptions function will be enabled.
Adjusts the volume level.
Scrolls through the saved programmes.
(MUTE) Mutes all sounds.
(Voice recognition)
Network connection is required to use the voice recognition function.
1 Press the voice recognition button.
2 Speak when the voice display window appears on the TV screen.
(SEARCH)* Search for content such as TV programmes, movies and
other videos, or perform a web search by entering text in the search bar.
A
B
(HOME) Accesses the Home menu.
* Shows the previous history.
1
- When you are not watching via a set-top box: the display changes to
the set-top box screen.
Wheel (OK) Press the center of the Wheel button to select a menu.
You can change programmes by using the Wheel button.
Navigation buttons (up/down/left/right)
Press the up, down, left or right button to scroll the menu.
If you press
will disappear from the screen and Magic Remote will operate like a
general remote control. To display the pointer on the screen again, shake
Magic Remote to the left and right.
Returns to the previous level.
* Clears on-screen displays and returns to last input viewing.
Shows programmes guide.
1
B
2
1
Displays the set-top box Home menu.
buttons while the pointer is in use, the pointer
13