Masquer les pouces Voir aussi pour Identity 6700:

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

6700, 6701, 6702
Operation & Maintenance Manual
Model Numbers
6700
Identity Tub/Shower System
6701
Identity Shower System
6702
Identity Tub/Shower System
Modifications
-1.5
CG
1.5 gpm (5.7 L/min) flow restrictor
-2.0
2.0 gpm (7.6 L/min) flow restrictor
-143
3 mode showerhead
-145
5 mode showerhead
-231
2 mode showerhead
-CHKS
Integral check stops - for use in
installations where a positive shut-off
device is used downstream of mixing valve
-IPS
1/2" female IPS connections
Less showerhead
-L/HD
-LP
Loop handle
-LR
Lever handle
-OP
13" oval plate
Rebuild trim kit
-REB-TRM
-REV
Reverse coring, hot on right, cold on
left, for back to back installations
-SS
Slip spout on any tub/shower unit
-STN
Satin Nickel finish
-TRM
Trim only, valve not included
-X
Integral service stops - allows water
shutoff at valve for service
Note: Append appropriate -suf x to model number.
Identity
Specification
6700
Tub/shower system powered by the Temptrol
balancing valve. Features adjustable stop screw to
limit handle turn. Components made from metal and
nonmetallic materials, plated in standard polished chrome
nish.
6701
Shower system powered by the Temptrol
balancing valve. Features adjustable stop screw to limit
handle turn, 1 mode showerhead with easy to clean rubber
nozzles and standard 2.5 gpm (9.5 L/min) ow restrictor.
Components made from metal and nonmetallic materials,
plated in standard polished chrome nish.
6702
Tub/shower system powered by the Temptrol
balancing valve. Features adjustable stop screw to limit
handle turn, diverter tub spout, 1 mode showerhead with
easy to clean rubber nozzles and standard 2.5 gpm
(9.5 L/min) ow restrictor. Components made from metal
and nonmetallic materials, plated in standard polished
chrome nish.
Compliance
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
For California Residents
WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects, or
other reproductive harm.
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
2.0 gpm (7.6 L/min)
pressure-
®
pressure-
®
pressure-
®
Certi ed by
CSA Group

Publicité

Table des Matières
loading

Sommaire des Matières pour Symmons Identity 6700

  • Page 1 Integral service stops - allows water shutoff at valve for service Warranty Limited Lifetime - to the original end purchaser in consumer/residential installations. 5 Years - for industrial/commercial installations. Refer to www.symmons.com/warranty for complete warranty information. Note: Append appropriate -suf x to model number.
  • Page 2: Dimensions

    Dimensions Measurements 5-7/8", 149 mm 4-5/8", 117 mm 3-1/2", 89 mm 2-7/8", 73 mm Ref. 77", 1956 mm Shower Valve Hole Size Min. Ø 3", 76 mm Max. Ø 4", 102 mm 3-1/2", 89 mm 12", 305 mm Rough-in 2-3/8" ± 1/2", 60 mm ± 13 mm Male 1/2"...
  • Page 3: Parts Breakdown

    Parts Breakdown Replacement Parts Item Description Part Number Showerhead 672SH* Shower Arm 300S* Flange Handle RTS-084* Set Screw Dome Cover T-19* Shower 6700-ESC* Escutcheon Kit Tub Spout 054* *Note: Append -STN to part number for Satin Nickel nish. Tools Required for Installation Water Supply Adjustable Wrench...
  • Page 4 Installation Note: 3) Install dome cover (F) to shower 5) Install tub spout (J) to pipe tting For valve body installation, please valve by turning clockwise. Turn clockwise to tighten. see valve body manual. 1) Install shower mounting plate (I) to shower valve.
  • Page 5: Troubleshooting Chart

    Finish is spotting. water staining on nish. non-abrasive cleaner and then quickly rinse with water. Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621 Copyright © 2017 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-3196 REV B 021617...
  • Page 6  5 años - para instalaciones industriales y comerciales. Llaves de paso integradas - permiten  Consulte www.symmons.com/warranty para obtener el cierre del agua en la válvula para información más completa sobre la garantía. el servicio Nota: Anexar el -complemento apropiado al número...
  • Page 7 Dimensiones Medidas 5-7/8", 149 mm 4-5/8", 117 mm 3-1/2”, 89 mm 2-7/8", 73 mm Ref. 77”, 1956 mm Tamaño de los ori cios de la válvula para ducha Mín. Ø 3”, 76 mm Máx. Ø 4", 102 mm 3-1/2”, 89 mm 12", 305 mm Empotrado 2 3/8”...
  • Page 8: Desglose De Piezas

    Desglose de piezas Repuestos Número Artículo Descripción de la pieza Cabezal 672SH* de ducha Brida del brazo 300S* de la ducha Manija Tornillo RTS-084* de presión Cubierta T-19* del domo Juego de escudete para 6700-ESC* la ducha Surtidor para 054* bañera *Nota: Anexar -STN al número de pieza para acabado de níquel satinado.
  • Page 9 Instalación Nota: 3) Instale la cubierta del domo (F) 5) Instale el surtidor para la bañera Para instalar el cuerpo de la válvula, a la válvula de la ducha girándola (J) a la conexión de la tubería vea el manual de la válvula. en el sentido de las manecillas girándolo en el sentido de las del reloj.
  • Page 10: Tabla De Resolución De Problemas

    Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Teléfono: (800) 796-6667 Fax: (800) 961-9621 Copyright © 2017 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-3196 REV B 021617...
  • Page 11: Spécifications

    5 ans – pour des installations commerciales et Robinet d’interruption du service - permet la  industrielles. Se reporter au site www.symmons.com/ coupure de l'eau à la vanne pour le service warranty pour des informations complètes concernant la garantie.
  • Page 12 Dimensions Mesures 5-7/8 po, 149 mm 4-5/8 po, 117 mm 3-1/2 po, 89 mm 2-7/8 po, 73 mm Réf. 77 po, 1956 mm Taille du trou pour la vanne de douche Min. Ø 3 po, 76 mm Max. Ø 4 po, 102 mm 3-1/2 po, 89 mm 12 po, 305 mm Robinetterie brute...
  • Page 13: Liste Des Pièces

    Liste des pièces Pièces de rechange Numéro Article Description de pièce Pomme de douche 672SH* Bras et bride de 300S* douche Assemblage RTS-084* Vis de pression Couvercle en dôme T-19* Douche 6700-ESC* Ensemble rosace Bec de baignoire 054* *Remarque : Juxtaposer le -STN au numéro de pièce pour le ni nickel satiné.
  • Page 14 Installation Remarque : 3) Installez le couvercle en dôme (F) à la 5) Installez le bec de baignoire (J) au Pour l'installation du corps de vanne, vanne de douche en tournant dans le raccord de tuyauterie en tournant veuillez consulter le manuel du corps sens des aiguilles d'une montre.
  • Page 15: Fonctionnement (Contrôle De La Température)

    à l'eau. Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Téléphone : (800) 796-6667 Télécopieur : (800) 961-9621 Copyright © 2017 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-3196 REV B 021617...

Ce manuel est également adapté pour:

Identity 6701Identity 6702

Table des Matières