Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9027913
4.
Non-skid footwear is recommended to maintain footing and
balance in the work environment.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Do not overreach when operating a tool. Proper footing and
balance enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety
rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Ensure that any grinder (or other stationary power tool) mounted to
the pedestal stand is stable and will not tip over. An improperly
mounted or unstable grinder is a work hazard and can lead to
personal injury.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
ASSEMBLING THE STAND
1.
Place the base (#3) on a flat, level surface.
4
Industrial Benc h Grinder P edestal Stand
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
