Publicité
Les langues disponibles
Les langues disponibles
3.1 PREPARATION FOR USE
1. Standing time
After the freezer is properly installed and well cleaned, do not switch
it on immediately. Wait to switch the freezer on only after more than 1
hour, so as to ensure its normal operation.
2. Cleaning
Con rm the accessory parts inside the freezer and wipe the inside
with a soft cloth.
3. Power-on
Insert the plug into the socket to start the compressor. After 1
hour, open the freezer door. If the temperature inside the freezer
compartment has dropped noticeably, the freezerration system is
working normally.
4. Storage of food
After the freezer has been running for a period of time, the internal
temperature of the freezer will be automatically controlled according
to the user's chosen temperature setting. After the freezer is fully
cooled, you may load it with food, which usually needs 2~3 hours to
cool completely. In summer, when the outside temperature is high, it
takes more than 4 hours for food to be fully cooled (Try to open the
freezer door as little as possible before the internal temperature cools
down).
！
Warning!
• If the freezer is installed, make sure to check whether the ground
wire and leakage circuit breaker are normal. If vibration noises
are produced due to the freezer contacting the wall or if the wall
gets blackened by air convection around the compressor, move the
freezer away from the wall.
42
Publicité
