Publicité
Les langues disponibles
Les langues disponibles
6. Installation of the appliance
• This appliance is not intended for use as a
built-in freezer.
• Use the front adjuster to level the
appliance. If the appliance is not level, it
may affect the performance of the gasket
seal or even lead to a failure of your
appliance.
• It must be possible to disconnect the
appliance from the mains power supply.
The plug must therefore be easily
accessible after installation.
• Place the appliance on a rm and at
surface ( oor) so that it is stable, otherwise
vibrations and noise may occur. When
placing the freezer on oor coverings
such as carpets, straw mats or polyvinyl
chloride (PVC), place a solid sheet or
cover under the freezer to prevent colour
change due to heat dissipation.
• Before plugging in the power cable, check
that the voltage and frequency of the type
plate match your power supply network.
The appliance must be earthed. The power
cable is supplied with a contact for this
purpose. If the socket is not earthed, connect
the appliance to a separate earth according
to current regulations and consult a quali ed
electrician.
7. Levelling the appliance
Adjustable shelves
The walls of the appliance are equipped with
a series of guide pro les so that the shelves
can be inserted if desired.
41
Publicité
