Replacing The Batteries - Pellini ScreenLine SL2380 Instructions D'installation

MAINTENANCE
The product requires no maintenance, except for replacement
of the rechargeable batteries as necessary. Any repairs must
be made by a technician authorized by Pellini SpA.
In the event of prolonged inaction, remove the batteries.
CLEANING
Clean the product using a clean, dry, soft cloth that does not
leave any residues. To remove stubborn dirt, you can slightly
moisten the cloth with warm water. Do not use solvent-con-
taining detergents. Do not clean the gold-plated contacts with
alcohol or other substances.

REPLACING THE BATTERIES

To replace the batteries use the following procedure:
1. Detach
module from its base
plate
2. Remove
compartment
by pressing in the area
indicated and sliding in
the direction shown in the
image
3. Remove the spent batteries
4. Insert the new batteries, paying attention to the
direction of insertion indicated on the bottom of the
battery compartment. To avoid the risk of damaging the
module, do not touch the exposed electronic parts
5. Before inserting the last battery, be careful not to rest
your hand or any other object on the sensitive area
since, as soon as all the batteries have been inserted,
the module will become 'live' and immediately and
automatically carry out a recalibration. If the module
is not working properly, carry out the recalibration
procedure
6. Place the cover back onto the battery compartment
7. Fit the battery module back onto its base plate
the battery
the battery
cover
15