Cooper Atkins Dual-Temp 2 481 Mode D'emploi page 3

481 INFRARED THERMOMETER
INDICATORS AND DISPLAY
+ -
HACCP temperature (LED) Indicators:
Green LED: <40°F (<4°C) or >140°F (>60°C)
Safe conditions for food
Red LED: 40°F to 140°F (4°C to 60°C)
Danger zone where bacteria grows.
LCD Display:
1. Upper display: Real time temperature readings.
2. Middle display: Maximum temperature
3. Lower display: Timer in "Hour: Minute: Second" order
4. : Probe temperature display.
5. HOLD: Freeze the last reading
6. : Low battery indicator
5
4
4
KEY PAD
LED Indicators
Main Display
Measure Key
Set Key
Mode Key
6
1
2
3
481 INFRARED THERMOMETER
OPERATION
1. Power On/Off
Press any key to turn on the meter in last operating
mode. It automatically turns off after 20 seconds
of non-operation.
2. Select display mode
Press MODE to select display modes. It cycles among
IR, Probe and Timer operation modes. In IR mode,
the LCD displays real time temperature and MAX
reading. The Probe mode displays a probe icon on
the left and temperature on main screen.
3. Switch temperature units
Users can select °F or °C as preferred by pressing
SET button when meter is on.
4. IR measurement: Surface temperature
Point the infrared sensor at the target, then press and
hold button to scan the object surface, the
illumination beam can be seen highlighting
the measurement area. The LCD displays real time
temperature and MAX value since power on. The red
or green flashes accordingly to tell if the reading falls
within the safe or danger zone.
5