Electrical Connection (Uk Only) - DeLonghi HVA Serie Mode D'emploi

IT EN
pag. 4 page 6
NL ES
pag. 13 pág. 15
RU KZ
стр. 21 Бет. 24
SK PL
str. 31 str. 33
DA FI
sid. 39 siv. 41
BG RO
стр. 47 pag. 50

ELECTRICAL CONNECTION (UK ONLY)

A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should
be cut off from the mains lead, and an appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in
the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be re-fitted when changing the fuse using a 13 Amp Asta
approved fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover
can be obtained from your nearest electrical dealer. The colour of the correct replacement fuse cover is that as marked on
the base of the plug.
B) If your appliance is not fitted with a plug, please follow the instructions provided below:
Important
The wires in the mains lead are coloured in accordance with the following code:
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which si marked with the letter L or coloured red.
FR
page 8
PT
pág. 17
HU
old. 27
NO
sid. 35
HR
str. 43
TR
say. 52
Blue: Neutral
Brown: Live
DE
S.10
EL
σελ.19
CS
str. 29
SV
sid. 37
SL
str. 45
SA
‫الذي تم إرفاقه مع وصف الجهاز (صفحة‬
2
2