FILLON TECHNOLOGIES Fill-One Mode D'emploi page 37

Masquer les pouces Voir aussi pour Fill-One:
Table des Matières

Publicité

MALFUNCTIONS
1) THE CUP SUPPORT CANNOT
BE
INSERTED
AEROSOL VALVE.
2) THE CUP SUPPORT DOES NOT
STAY ON THE AEROSOL.
3) THE DISK DOES NOT FIT ON
THE PISTON HEAD.
4) THE CAP DOES NOT FIT IN
THE CUP SUPPORT.
5) THE "CAP/CUP SUPPORT/
AEROSOL" ASSEMBLY DOES
NOT FIT INSIDE THE AEROSOL
VALVE.
6) THE ADJUSTABLE PLATFORM
DOES NOT PIVOT.
7)
THE
DOOR
CLOSE.
Fill-One by Fillon Technologies
1a) Check the compatibility of the aerosol with the cup
support.
ONTO
THE
1b) Check that there is no object obstructing the entry to the
cup support fl ange.
2a) Check whether the cup support fl ange is worn.
2b) Check the compatibility of the cup support with the
machine.
2c) Check whether the 3 screws on the cup support fl ange are
properly tightened.
3a) Check the compatibility of the disk with the machine.
3b) Check that a disk is not already present on the machine
piston.
3c) Check the disk is inserted the right way round.
3d) Check that the machine piston head is clean.
4a) Check the compatibility of the cap with the machine.
4b) Check that the cap is properly indexed in the cup
support.
4c) Check that there are no objects in the base of the cup
support.
4d) Check that the extractor pins slide correctly in their
housing.
5a) Check that there is a disk on the piston head.
5b) Check that the adjustable platform is lowered.
5c) Check that the machine door is open as far as possible:
handle on the stopper.
5d) Check that the cup support is properly positioned on the
aerosol.
5e) Check that the piston is not in the low position.
5f) Check the height of the aerosol is compatible with the
machine.
6a) Check that there are no objects preventing the platform
from turning freely.
6b) Check that the machine base threaded guide is clean.
DOES
NOT
7a) Check that the cup support is properly inserted as far as it
will go into the machine.
7b) Check that no object is in the way of the door closing.
SOLUTIONS
37

Publicité

Table des Matières
loading

Table des Matières